18253117069
首页
关于我们
产品展示
新闻资讯
联系我们
电话咨询
电话咨询:18253117069
返回顶部
当前位置: 主页 > 新闻资讯 >
母线加工机日常使用注意事项
发布时间:2021-03-02 10:03
浏览次数:
1)必须选用经过严格培训、并熟练掌握使用、保养等技术的操作人员进行母线加工机操作.

1) must undergo a rigorous selection and training, and proficiency in the use, maintenance and other technical operations staff bus processing machine operation.

  2)操作人员不能穿戴肥大的服装、佩戴装饰用品,袖口、腰围需收紧,避免出现被母线加工机牵拽的危险情况;还要根据需要使用安全帽、安全靴及手套等防护用品.

2) clothing, wearing decorative supplies cannot wear hypertrophy of the operating personnel, cuffs, waist to tighten, avoid by bus processing machine holding dangerous situation pull; according to the need to use safety helmet, safety shoes and gloves and other protective equipment.

  3)母线加工机工作台面及周围没有其它工作者和障碍物,才能开始运转母线加工机;还要确保侧板、电控柜等关闭完好情况下进行开机工作.

3) no other workers and obstacle bus processing machine working table and began to run around, can bus processing machine; and that the side plate, electric control cabinet closed intact condition of start working.

  4)母线加工机操作人员不能在短时间内进行频繁接通或切断电源的工作.

4) bus processing machine operator cannot be carried out in a short time frequent switch on or switch off the power of work.

  5)使用母线加工机时要注意触电:母线加工机电控柜内为强电压,触电可引起死亡事故.需要维护时:要首先切断工厂侧的主电源,然后打开电控柜,再进行作业;母线加工机运转中一旦出现故障,要立即关闭设备总电源开关,并及时相关人员联系.

5) the use of bus processing machine to the attention of electric shock: bus processing machine electrical control cabinet for high voltage, electric shock can cause death accident. When maintenance is required: must first cut off the main power plant side, then open the cabinet, then work; bus processing machine operation failure, to turn the device off the total power switch immediately in time, and the related people.


相关推荐
Copyright © 济南振捷电力设备有限公司 www.qqa2.com 版权所有  技术支持:844287734